Dan Breeding:

“The Chad Project Drilling Start-Up: High Performance Expectations in a Remote Area;  D.L. Breeding, ExxonMobil Development Company, SPE  79900-MS  2003.

Larry Cress:

“History and Development of a Rotating Blowout Preventer”;  Cress, L.A., Clayton W. Williams Jr. Inc.; Stone, Rick, Petratex Resources Inc.; Tangedahl, Mike, Seal Tech, SPE  23931-MS  1992.

“New Applications for Underbalanced Drilling Equipment”;  Stone, Charles R., Cress, Larry A., Signa Engineering Corp., SPE  37679-MS  1997. 

“How and When To Run a PDC Bit in the Upper Texas Gulf Coast-An Operator's Viewpoint”;  Cress, L.A., Damson Oil Corp., SPE  11388-MS  1983.

Jeff Cummins:

“Pressured Mud Cap Drilling: Efficient Drilling of High-Pressure Fractured Reservoirs”;  R. Urselmann, Shell Venezuela S.A.; J. Cummins , Signa Engineering Corp; R.N. Worrall, Shell Venezuela S.A.; G. House , Noble Drilling de Venezuela S.A., SPE  52828-MS  1999.

Dusty Kinchen:

“Drilling Techniques Used in Successful Redevelopment of Low Pressure H2S Gas Carbonate Formation”;  D. Kinchen, M.A. Peavy, Kerr-McGee Oil & Gas Onshore, LLC; T. Brookey, ActiSystems, Inc.; D. Rhodes, MI Drilling Fluids, LLC,  SPE  67743-MS  2001.

Eric Kolstad:

“An Innovative Approach to Development Drilling in Deepwater Gulf of Mexico”;  Pat Watson, Eric Kolstad, Richard Borstmayer, Anadarko Petroleum; Tom Pope, Halliburton Energy Services; Andy Reseigh, Transocean Inc.;  SPE  79809-MS  2003. 

“Reducing Drilling Costs in Deep-Water Gulf of Mexico Utilizing Two Piece Drill Out Reaming Technology”;  Patrick A. Watson, Eric S. Kolstad, Union Pacific Resources Corp./Anadarko Petroleum Corp.; Thomas T. O'Grady, Hughes Christensen/Baker Hughes:  SPE  67767-MS  2001. 

“Application of Purpose-Built Rig Technology Results in Step Change of Drilling Time, Cost, and Opportunities”;  E.S. Kolstad, New Tech Engineering; L.D. Steinke, and L.S. Brady, Williams Production RMT Co.; and S.P. Marchand, Helmerich & Payne Intl. Drilling Co.; SPE  105644-MS  2007.

Mark Malone:

“Successful Fracture Stimulation in Tight Gas Sands of Southeast New Mexico with Binary Foam,” Co-author, Southwestern Petroleum Short Course, Lubbock, TX., April 1998.

“Enzyme Breaker Technology Increases Production, Grayburg-Jackson Field, Southeast New Mexico: A Case History,” SPE 59709, Primary Author, SPE Permian Basin Oil & Gas Recovery Conference, Midland, TX., March 2000.

“Enzyme Breaker Technology Increases Production, Grayburg-Jackson Field, Southeast New Mexico: A Case History,”  Primary Author, Journal of Petroleum Technology, October 2000.

“Organoborates Combined with Guar-Specific Enzyme Breakers Increase Production and Outperform Competitive Fluid Systems in the Grayburg-Jackson Field, Southeast New Mexico,” Primary Author, Southwestern Petroleum Short Course, Lubbock, TX., April 2000.

“Fracturing with Crosslinked Methanol in Water Sensitive Formations,” Author, SPE 70009, SPE Permian Basin Oil & Gas Recovery Conference, Midland, TX., May 2001.

“Fracture Pre-Treatment: A Patented Process has been Developed to Intensify Breaker Activity, Minimize Polymer Damage and Maximize Post Fracture Permeability,” Co-author,  Southwestern Petroleum Short Course, Lubbock, TX., April 2001.

“Development, Laboratory Testing, and First Field Applications of New Relative Permeability Modifier to Reduce Water Production,” Co-author, Offshore Mediterranean Conference and Exhibition, Ravenna, Italy, March 2003.

“Fracture Stimulation of the Morrow Formation with Crosslinked Methanol: A Case History,” SPE 86482, Primary Author, SPE International Symposium and Exhibition on Formation Damage Control, Lafayette, LA., February, 2004.

“Lightweight Proppant a New Innovation in Hydraulic Fracturing,” Co-author, Southwestern Petroleum Short Course, Lubbock, TX., April, 2004.

“Maximizing Fracture Conductivity with Proppant Partial Monolayers: Theoretical Curiosity or Highly Productive Reality?” SPE paper 90698, co-author, SPE Annual Technical Conference and Exhibition, Houston, TX. September, 2004.

“Extensive Investigation of Whipstock Cement Plug Designs at 299°F Yield Critical Developments,” AADE-05-NTCE-135, co-author, AADE 2005 National Technical Conference and Exhibition, Houston, TX., April , 2005.

“Lightweight proppants in slick water frac boost flush output, cut post-frac decline” Co-author, World Oil, September 2006.

“Stimulation of Gas Shales, They’re all the same…Right?,” SPE paper 106070, co-author,  SPE Hydraulic Fracturing Technology Conference, College Station, TX., January, 2007.

Modern Fracturing, Enhancing Natural Gas Production, Hydraulic Fracturing Text, Contributing author, October 2007. Published by BJ Services Company in cooperation with Michael J. Economides.

Dennis Moore:

“Simplifying MPD: Lessons Learned”;  George H. Medley, SPE, Dennis Moore, SPE, and Sagar Nauduri, SPE, Signa Engineering, SPE  113689-MS  2008.

“Simultaneous Dynamic Killing and Cementing of a Live Well”;  R.D. Strickler, ConocoPhillips; D. Moore, Signa Engineering Corp.; and P. Solano, Halliburton, SPE  98440-MS  2006.

“Drilling Underbalanced in Hassi Messaoud”;  D.D. Moore, Signa Engineering Corp.; A. Bencheikh, Sonatrach; J.R. Chopty, Weatherford Intl. Ltd., SPE  91519-MS  2004.

Louis Romo:

"Challenges Associated with Subsalt Tar in the Mad Dog Field";   Romo, L., Prewett, H., Shaughnessy, J., Banerjee, S., Lisle, E., Willson, S., SPE 110493, 2007.

"New Constant-Rheology Synthetic-Based Fluid Reduces Downhole Losses in Deepwater Environments";   Rojas, J.C., Bern, P.A., Romo, L.A., Greene, B., Irby, R.D., Dye, W., Daugherty, W.T., Trotter, R.N., SPE 109586, 2007.

 “Drilling Challenges for Deepwater and HPHT Drilling; An Operators Perspective”;   Romo, L. A., OMAE 29702, 2007.

"Extreme Drilling Environment Forces Evolution of Rotary Steerable Systems and Rotary Steerable Bit Technology";  Cox, B., Romo, L., Champion, B., Maung, O., Card, K. and Barton, S., SPE 105906, 2007.

"Optimizing Drilling Operations in the Arkoma Basin: Building on Success";  Romo, L.A., Bert, D.R., Richard, C., Kuwertz, L., Koederitz, W.L., Card, K. and Barton, S., SPE 104598, 2006.

"Problems of Ultra-Deep High-Temperature, High-Pressure Drilling";  Shaughnessy J.M., Romo, L.A., and Soza, R. L., SPE 84555, 2003.

"Successfully Drilling Highly Depleted Sands";  Shaughnessy J.M.; Fuqua, R.J.; and Romo, L.A., SPE 67744, 2001.

"Analysis of Ultra-Deepwater Kick Detection";  Romo, L.A. and Flak, L.H., presented at the IADC Well Control Conference for Europe (June 1999).

"Deepwater Dynamic Kill Considerations",  Flak, L.H. and Romo, L.A., presented at the IADC Deepwater Well Control Conference in Houston (August 1998).

Bob Tuttle:

"Fractionation Treating Facilities"; co-author, presented at the Gas Processors Association Annual Convention.  Subsequently published in Oil and Gas Journal.